Procedure of applying microcement on different surfaces

Outline distinct procedures for applying microcement on different surfaces and environments. The key differences and considerations for each type of micro cement work:

 1. Microcement on Walls -

- Preparation: Walls must be flat and even; uneven surfaces should be leveled with waterproof putty.

- Application: Involves a primer followed by two coats of micro cement, each followed by drying and light sanding.

- Finish: Requires a sealing agent and potentially a polyurethane finish if in wet areas like bathrooms.

- Drying Time: Varies from 6 to 12 hours depending on weather conditions for microcement layers; faster drying times for the primer.

2. Microcement on Floor (Tile Surface)

- Preparation: Ideal on ceramic tile surfaces, but any hollowing or cracks must be treated first. - Application: Starts with an interface agent, then a fiber mesh, then layers of coarse and fine sand micro cement with intermediate sanding or polishing.

- Finish: Concludes with a sealing agent and two-component polyurethane finish for durability and waterproofing.

- Drying Time: Longer drying times ranging from 8 to 10 hours for microcement, with a critical 72-hour waiting period after the final finish.

3. Microcement on Floor (Concrete Surface)

- Preparation: Requires a flat and crack-free concrete surface.

- Application: Similar to the tile surface process with the addition of a primer, fiber mesh, and multiple layers of micro cement, each involving pigment mixing and thorough stirring. - Finish: Also concludes with a sealing agent and two-component polyurethane finish.

- Drying Time: Similar to tile surface, with an emphasis on waiting times for thorough drying and hardening.

4. Microcement in Wet Areas (e.g., Toilets, Kitchens)

- Application: Similar to standard wall application but emphasizes the need for a water-resistant finish due to the environment.

- Finish: Requires a sealing agent followed by two coats of a two-component polyurethane finish, tailored to enhance water resistance and durability in wet conditions.

- Drying Time: Focuses on adequate drying between layers to ensure adherence and effectiveness of the water-resistant finish. Key Differences and Considerations.

- Surface Preparation: Each type requires specific preparation depending on the substrate (wall, tile, concrete) to ensure the micro cement adheres properly and lasts.

- Drying and Curing Times: Vary significantly based on the environment and the specific layer of micro cement or sealant being applied. Adequate drying is crucial to prevent issues like cracking or peeling.

- Finishing Techniques: While all types involve some form of sealing and finishing, the choice of finish (e.g., polyurethane) and its application can vary, particularly in wet areas where water resistance is critical.

- Environmental Factors: Humidity and temperature can affect drying times and the success of the application, with longer waits required in wetter conditions. These procedures ensure that the micro cement application is appropriate for the intended surface and usage, maximizing durability and aesthetic appeal.